Huawei Quidway S9312 S9312E Routing Switch S9306 Quick Installation Guide pdf datasheet

Huawei Quidway S9312 S9312E Routing Switch S9306 Quick Installation Guide pdf datasheet

Precautions
• This document provides an installation instruction for the S9303. For information about installing
the power distribution boxes and cabinet, see the Power Distribution Guide and the Cabinet
Installation Guide.
• This document describes only the on-site installation operations, but does not describe the predelivery
installation such as the installation of internal cables.

ESD
Before touching the device, boards and IC chips, wear
the ESD wrist strap to prevent the electrostatic
discharge of the human body from damaging the
sensitive components. Ensure that the other end of the
ESD wrist strap is well grounded.

Cable bundle
Binding the cables inside the cabinet
• The distance between cable ties for all cables and corrugated pipes is determined according to the
distance between two horizontal beams.
• For power cables and ground cable, the distance between cable ties is within 250 mm.
Binding the cables outside the cabinet
• The distance between two tie wraps depends on the distance between the beams beside the cabinet.
• For the cable trough without beams, bundle the cables with the distance not exceeding 250 mm
between cable ties.

Labels and tags
• Attach the label or tag to the signal cable, 20 mm away from the connector.
• When the cable is placed vertically, the label or tag should point towards the right.
• When the cable is placed horizontally, the label or tag should point downwards.

• Do not connect the power cable to the power supply device before the installation is complete.
• It is recommended that you separate the power cables from the signal cables.
• Do not install both the DC power supply and AC power supply on the same equipment.
• When multiple S9300&S9300Es are installed in the same cabinet, there must be a 1 U (1 U =
44.45 mm) or larger space between the S9300&S9300Es.

Click Here to Download Huawei Quidway S9312 Routing Switches S9312 S9312E Quick_Installation_Guide English.pdf

HoSunn - Leading Huawei Quidway S9312 S9306 S9300 Routing Switches Supplier.S9306 S9303 S9312 Solution Application Quick Installation Guide pdf datasheet Manual Configuration Technical Support Resonalbe Price.

Huawei Quidway S9312 terabit routing switch overview Carrier-Class Ethernet Switch

Huawei Quidway S9312 terabit routing switch overview Carrier-Class Ethernet Switch

Quick Details

Products Status:	Stock	Ports:	≥ 48	Transmission Rate:	10/100/1000Mbps
Function:	LACP,QoS,SNMP,VLAN Support	Communication Mode:	Full-Duplex	Switch Capacity:	2 T/5.12 T
Brand Name:	Huawei	Model Number:	S9312	Place of Origin:	China (Mainland)
Backplane capacity:	12 Tbps	Throughput:	1344 Mpps/3360 Mpps	Energy Management:	Supports IEEE 802.3az Energy Efficient Ethernet.
Chassis dimensions (w x d x h) (mm):	442x476x664	Chassis weight (empty):	<45Kg

Item	S9303	S9306		S9312
Backplane capacity	3 Tbps	6 Tbps		12 Tbps
Switching capacity	768 G/1.92 T	2 T/5.12 T		2 T/5.12 T
Throughput	576 Mpps/1440 Mpps	1152 Mpps/ 2880Mpps		1344 Mpps/3360 Mpps
LPU slots	3	6		12
VLAN	Supports access, trunk, and hybrid VLAN.
	Supports the default VLAN.
	Supports VLAN switching.
	Supports QinQ and selective QinQ.
	Supports dynamic VLAN allocation based on MAC.
MAC address	Supports dynamic learning and aging of MAC addresses.
	Supports static, dynamic, and blackhole MAC address entries.
	Filters packets based on source MAC addresses.
	Restricts MAC address learning based on ports and VLANs.
STP	Supports STP(IEEE 802.1d), RSTP(IEEE 802.1w), and MSTP(IEEE 802.1s).
	Supports BPDU protection, root protection, and loop protection.
	Supports BPDU tunnels.
IP routing	Supports IPv4 routing protocols, such as RIP, OSPF, BGP, and IS-IS.
	Supports IPv6 routing protocols, such as RIPng, OSPFv3, ISISv6, and BGP4+.
Multicast	Supports IGMP v1/v2/v3 and IGMP v1/v2/v3 snooping.
	Supports PIM DM, PIM SM, and PIM SSM.
	Supports MSDP and MBGP.
	Supports prompt leave of multicast members.
	Supports multicast traffic control.
	Supports the multicast querier.
	Supports suppression on multicast packets.
	Supports multicast CAC.
	Supports multicast ACL.
MPLS	Supports basic MPLS functions.
	Supports MPLS OAM.
	Supports MPLS TE.
	Supports MPLS VPN/VLL/VPLS.
Reliability	Supports LACP and Enhanced-Trunk.
	Supports VRRP and BFD for VRRP.
	Supports BFD for BGP, IS-IS, OSPF, and Static routing.
	Supports NSF and GR for BGP, IS-IS, OSPF and LDP.
	Supports TE FRR and IP FRR.
	Supports Ethernet OAM (802.3ah and 802.1ag).
	Supports ITU-Y.1731.
	Supports DLDP.
	Supports ISSU.
	Supports CSS.
QoS	Supports traffic classification based on the Layer-2 header, Layer-3 information, Layer-4 information, and 802.1p priority.
	Supports the actions of ACL, CAR, re-mark, and schedule.
	Supports the queue scheduling algorithms of PQ, WRR, DRR, PQ+WRR, and PQ+DRR.
	Supports congestion avoidance mechanisms, such as WRED and tail drop.
	Supports H-QoS.
	Supports traffic shaping.
Configuration and maintenance	Supports Console, Telnet, and SSH terminals.
	Supports network management protocols, such as SNMPv1/v2/v3.
	Supports file uploading and downloading through FTP and TFTP.
	Supports BootROM upgrades and remote upgrades.
	Supports hot patches.
	Supports user operation logs.
Security and management	Supports 802.1x authentication and portal authentication.
	Supports NAC.
	Supports RADIUS and HWTACACS authentication for login users.
	Provides hierarchical protection for commands to prevent unauthorized users from accessing the equipment.
	Defends against DoS attack, TCP SYN Flood attack, UDP Flood attack, broadcast storm, and heavy traffic attack.
	Provides 1K CPU queues for CPU protection.
	Supports the ping and tracert functions based on ICMP packets.
	Supports RMON.
Service function	Supports Firewall.
	Supports NAT.
	Supports Netstream.
	Supports IPSec.
	Supports Load Balance.
	Supports WLAN AC.
Energy Management	Supports IEEE 802.3az Energy Efficient Ethernet.
Chassis dimensions (width x depth x height) (mm)	442×476×175	442×476×442	442×476×664
Chassis weight (empty)	<15Kg	<30Kg	<45Kg
Working voltage	DC: –38.4V to –72V AC: 90V to 290V
Chassis power supply capability (without PoE power supply)	800W	1600W		1600W
Chassis PoE power supply capability	2200W	8800W		8800W

Figure-1 Huawei Quidway S9312 terabit routing switch

HoSunn - Leading Huawei Quidway S9312 S9306 S9300 Routing Switches Supplier.S9306 S9303 S9312 Solution Application Quick Installation Guide pdf datasheet Manual Configuration Technical Support Resonalbe Price.